Tips From the Moving Business Pros: Ways To Move a Pinball Device



With pinball making a big resurgence throughout the country, Gentle Giant wishes to make sure that these traditional, lovely machines remain damage-free while being carried. Oh, and we want individuals moving them to be safe, too.

In the beginning glimpse, pinball makers can appear intimidating to move since of their size, weight, and fragility. Fortunately, our proficient Giants have a few tricks up their sleeves to guarantee your pinball is moved with ease.
Folding Down the Headbox

Most of contemporary pinballs (made in the last Twenty Years approximately) have a hinge system which allows the headbox to be folded down. Early pinball devices had their headboxes bolted on, utilizing either two or 4 bolts. All Electro-Mechanical pinballs utilize this system, along with the early Solid State makers.

Later devices have hinges and utilize a locking system to keep the headbox upright. There may also be 2 bolts inside as included safety, in case the lock is broken or accidentally un-latched.
Electro-Mechanical Pinballs

For Electro-Mechanical pinball devices, you require to get rid of the headbox rear access panel to access to the bolts and plugs within. Usually this panel has a lock on it to keep it in place, however with time the key may have been lost. Rather typically, there is a screw keeping this panel in place.

When within, get rid of the bolts and unplug the large adapters that have circuitry going down into the device. You might desire to label these ports to put them back in the ideal spot, but they must be various sizes, making it difficult to plug back incorrectly.

You can now eliminate the headbox entirely, or fold the headbox down onto the playfield glass. Make sure you use some foam, heavy cardboard, or blankets to safeguard the headbox from rubbing on the cabinet. Foam is best, as it will assist keep the back glass in place.
Early Solid State Pinballs

For early Solid State Pinballs, you will have to get rid of the back glass. There is a lock located on the headbox in one of 3 areas: the left-hand side at the top, right-hand side on top or on top of the headbox in the center.

Once unlocked, eliminate the back glass by raising it up utilizing the lift channel (at the bottom of the glass), and then pull it out from the bottom.

Open up the back box lamp panel by raising the lock situated on either the left-hand side or right-hand side. The panel can now swing out towards you, and give you access to the circuit boards, plugs, and the bolts. Some Gottlieb pinballs require you to raise the light panel in order to swing it open.

Now that you are within, you can remove the bolts, and any plugs that have wires going down into the device. You might desire to identify these plugs to put them back in the right spot. You might not require to get rid of the plugs, as the wiring ought to be long enough to enable the headbox to be folded down.

At this moment, you can secure the light panel and replace the back glass.
Modern Solid State Pinballs

For Data East, Sega, and Stern Modern pinballs, there is a turnable latch system situated at the back of the headbox. Utilizing the provided secret, turn the latch 90 ° counter-clockwise.

For Williams, Bally, and Gottlieb, you can easily unlatch the back box at the back of the device. This is an easy setup and needs no tools.

You're done if you can now fold down the head box onto the cabinet. Make sure you use some foam, heavy cardboard, or blankets to safeguard the headbox from rubbing on the cabinet. Foam is best, as it will likewise assist keep the back glass in location.

If you can not fold the head box down, then you require to enter. There is a lock situated at the top of the back glass in the. Utilize the provided secret to unlock, and remove the back glass by lifting it up from the bottom, and then pulling it out from the bottom.

Next, you will have to eliminate the display screen panel. You can do this by raising it up and out. And lastly, open the lamp panel. There will be a latch located on either the right-hand or left-hand side. (Some more recent Williams and Bally pinballs do not have a weblink different amp panel, it becomes part of the back glass panel. And later on Sega and Stern pinballs utilize a fluorescent tube for the back glass lighting).

Get rid of the 2 bolts, put the back box back together, and fold down the head box onto the cabinet. Make sure you use some foam, heavy cardboard, or blankets to protect the headbox from rubbing on the cabinet. Foam is best, as it will also help keep the back glass in place.
Eliminating the Legs.

Pinball Device legs are kept in location by 8 bolts. They will be either 5/8 inch or 9/16 inch heads. The modern-day pinballs have captive nuts or threaded plates inside for the bolts to screw into. These bolts can be gotten rid of, and the legs will come off.

But these captive nuts and threaded plates can be damaged, and the use of extra nuts may have been required. If this holds true, you will have to open navigate to this website the front door of the pinball, slide out the playfield glass, and raise the playfield.

With the front door (coin door) open, move the lock down bar lock throughout and remove the lock down bar. Then slide out the playfield glass, and put in a safe place. Next, lift up the playfield by placing your hand where the ball drains, and lift the playfield up.

You ought to now have Get More Info access to any nuts that may have been used. When any nuts have been eliminated, replace the playfield glass and lock down bar, and lock the front door.

Make sure to mark or keep in mind which legs are for the front and back, as they will be changed in a different way to fit.
Packing the Pinball.

You are now prepared to transfer your pinball device. Prior to you fill it, make certain you get rid of the pinballs so they do not bounce around throughout transportation.

If you are moving the pinball using a van or SUV, it might be much easier to get rid of the legs simply prior to filling the device. Get a pal to assist and have one of you supporting the pinball, while the other eliminates the front legs.

Ensure you strap the pinball in, as you do not want it moving if you have to stop suddenly!

For Electro-Mechanical pinball machines, you require to get rid of the headbox rear gain access to panel to get access to the bolts and plugs within. (Some more recent Williams and Bally pinballs do not have a different amp panel, it is part of the back glass panel. And later on Sega and Stern pinballs use a fluorescent tube for the back glass lighting).

If you are moving the pinball using a van or SUV, it may be easier to remove the legs simply prior to filling the maker. Get a pal to have and help one of you supporting the pinball, while the other eliminates the front legs.

Leave a Reply

Your email address will not be published. Required fields are marked *